modification の変更点
日本語版は[[こちら>../製品版のカスタマイズ]]。
日本語ページは[[こちら>../製品版のカスタマイズ]]。
~
Oculus Rift CV1 is great.
But there are a few problems for me.
~
I will try to fix them at this page.
*Making of my own face pad
The official face pad is not good for me.
+Its side edge doesn't fit my glasses. (Most glasses might be same.)
+Its lower edge doesn't fit my nose. (Because I'm asian.)
+Its upper edge doesn't fit my forehead. (Because I'm asian.)
~
Fortunately, the face pad is removable from Rift.
So I will try to make my own face pad.
~
The new face pad allows 145mm wide glasses.
**Materials & Tools
|Item|Detail|h
|Hard board|Material for clips. &br; Required sizes of plate are 150mm x 150mm.&br;I used 2mm-thick vinyl chloride plate. It's easy to cut.|
|Metal plate|Material for base of face pad. &br; Required sizes are 200mm x 100mm.&br;I used 0.3mm thick alminum plate. It's easy to bend.|
|Foam|Material for cushion.&br;I used foam tape. (It's common in Japan.)|
|Fabric|Material for surface of cushion.&br;Required sizes are 200mm x 100mm.|
|Sheet metal snips|Tool for cutting a metal plate.|
|Scissors|Tool for cutting a pattern, a hard board and fabric.|
|Hot glue gun|Tool for bonding a hard boards to a metal plate.|
|Double-faced adhesive tape|Tool for bonding cloth to foam.|
**Patterns
+An pattern of face pad for asian who are wearing glasses. (I made my face pad with this.)
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_asian_20160516.pdf)
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_asian_20160516.png,,20%)
~
+An pattern of face pad for persons who are wearing glasses.
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_glasses_20160516.pdf)
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_glasses_20160516.png,,20%)
~
+An pattern of tracing of official face pad.
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_normal_20160516.pdf)
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_normal_20160516.png,,20%)
~
+Original SVG file. You can modify patterns with [[Inkscape>https://inkscape.org/]], etc.
#ref(../製品版のカスタマイズ/oculus_rift_cv1_facepad_20160514.svg)
**Procedure
+Print the pattern which you like.
+Cut two red parts and a black part with scissors.
+Mark edges of red parts to a hard board with pen.
+Mark edges of black part to a metal plate with pen.
+Mark edges of black part to a fabric with pen.
+Cut hard board with scissors. Adjust them so that they fit notches of Rift.
+Cut a metal plate with metal snips.
+Cut a fabric with scissors.
+Press a metal plate to hard board vertically and bend a metal plate so that it fit inside arch of hard board.
+Bond hard boards to metal plate vertically with hot glue gun. And check fitting with notch of Rift.
+Coat edges of metal plate with glue as injury prevention.
+Stick foam to metal plate with tape.
+Stick fabric to foam with tape.
~
#ref(../製品版のカスタマイズ/facepad05.jpg,right,around,33.3%)
#ref(../製品版のカスタマイズ/facepad04.jpg,right,around,33.3%)
#ref(../製品版のカスタマイズ/facepad03.jpg,right,around,33.3%)
#ref(../製品版のカスタマイズ/facepad02.jpg,right,around,33.3%)
#ref(../製品版のカスタマイズ/facepad01.jpg,right,around,33.3%)
#clear
**Finished face pad
~
#vine(i22qdwTImwd)
#vine(i22bb0U9OOx)
~
Here is comparison of my face pad with official one.
#ref(../製品版のカスタマイズ/facepad_compare.jpg,,33.3%)
*Amazon
#amazon(B01DHKBVQQ,left)
#amazon(B0199DNJHO,left)
#amazon(B00WMCTJW4,left)
#amazon(4798137464,left)
#amazon(B012VRQX4G,left)
#amazon(B015IDHRH2,left)
